Every device runs itself.
Your day stays simple.
Staykey rotates access codes, sets the climate, and auto-locks the door in the background — so your dashboard stays focused on what matters: who's arriving, who's leaving, and which property is ready.
- Runs on your hardware
- Works offline
- No vendor lock-in
Good afternoon, Sarah
Thu, Apr 16
2
1
1
3
Today
Anderson party
Lakeside Studio
Cleaning
Lakeside Studio · Sarah's Cleans
Smith family
Mountain View Cabin
Recent activity
Auto-logged- 2m
Access code rotated
Mountain View Cabin · 8-4291
- 14m
Climate set to 72°F
Lakeside Studio · stay range applied
- 1h
Front door auto-locked
Downtown Loft · 30m after checkout
The real host dashboard — stays and turnovers up top, device activity handled silently below.
Everything your guest needs, in one place.
Four device categories, one consistent set of controls, one view of the whole portfolio.
Locks & rotating codes
Every stay gets a unique code that activates at check-in and dies at checkout. No more shared master codes, no more 'who has the key?'
- Per-stay codes, auto-rotated
- Staff and cleaner codes on their own schedule
- Remote lock and unlock from any device
Climate with guardrails
Set the range you're comfortable letting guests use. Staykey enforces it automatically and drops back to an energy-saving setpoint when the property sits empty.
- Per-stay guest range (e.g. 65–78°F)
- Automatic vacant setback between stays
- Works with any Home Assistant-supported thermostat
Garage, gates & covers
Give guests controlled access to the garage or front gate, bounded by their stay window. Close everything automatically after checkout.
- One-tap open/close from the guest portal
- Auto-close on a timer or at checkout
- Status rolls up into the portfolio view
Lights, scenes & alarms
Welcome-home scenes at check-in, pathway lighting at night, alarm arming after checkout. Set it once per property; Staykey triggers the rest.
- Arrival and departure scenes
- Exterior lights tied to sunset
- Alarm state tied to occupancy
Works with the hardware you already have.
Staykey runs on top of Home Assistant, so you can pick the locks, thermostats, and sensors that fit your budget — not ours.
- Airbnbairbnb
- VrboVrbo
- Home AssistantHome Assistant
It runs itself between bookings.
Staykey connects your calendar to your devices so the boring, repeating stuff happens without a checklist.
When
Booking syncs from Airbnb or VRBO
Staykey
Portal link generated, code queued for check-in
Staykey builds the portal URL from the confirmation code and stages a unique door code scoped to the stay window.
When
Guest checks in
Staykey
Door code activates, thermostat enters guest range
Climate moves to the range you set for guests (e.g. 65–78°F) and welcome-home lighting scenes fire automatically.
When
Guest checks out
Staykey
Code revokes, climate returns to vacant setpoint
Everything the guest touched reverts to your default. No stray codes, no 75° empty house for three days.
When
Low battery or offline device
Staykey
Host gets alerted before the guest does
Alerts go to your phone the moment a lock, sensor, or hub loses connection — so you can fix it while the property is still vacant.
When
Door left unlocked past checkout
Staykey
Auto-lock plus notification
If the cleaner forgets or a guest heads out the door with an arm full of bags, Staykey closes the loop.
Dig deeper
How smart control actually works
The complete guide to smart locks for Airbnb hosts
Which locks to buy, how to automate codes, and how to stay out of the "my guest is locked out at 11pm" loop.
Read the guideHelpSupported smart locks
The full list of locks we've tested with Staykey - and what to expect from each.
Open articleWhy HAWhy we build on Home Assistant
The long answer to "why not just use Seam?" - local control, no vendor lock-in, every integration on day one.
Read the essayStop juggling five device apps.
Bring every lock, thermostat, and garage into one place and let Staykey handle the turn-over routine automatically.
30 days free · Set up in 5 minutes · Cancel anytime